Insert

Shipping Days	All Same day 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less

?* Information on days to ship and prices

• 

  Self-Tapping Inserts / Slotted

  MISUMI

  It is a split groove threaded insert, threaded on both the inner and outer diameters.
  Fasteners that do not require a front force strip to compensate for the mechanical strength of threaded sections made of materials with relatively low strength.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.24 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Insert Nitronics 60

  RECOIL

  Insert to prevent screw galling (seizing). No lubricating oil required. (Helisert and sprue).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	2.80 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Ultrasert UD2 / UD4 (Brass Cadmium-Free)【1-5,000 Pieces Per Package】

  TOKAI METAL INDUSTRY

  These inserts are the best choice for easy and secure fitment into plastic holes.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.20 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Dodge Bit Insert (Standard) SB Brass (Cadmium-Free)【1-8,000 Pieces Per Package】

  TOKAI METAL INDUSTRY

  A general-purpose well-balanced screw insert with low cost.
  [Features]
  ・ At the time of press-fit, the product has direction.
  ・ An insert nut that is well balanced in all aspects including easy use, holding power, cost, etc.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.16 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Ensat, Slotted Type 302

  KKV

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  • Volume Discount

  • Stock

  Select to compare

  Configure now
  Starting from∗ ：	0.47 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Serrated locking plates, Stainless Steel

  GANTER

  With the aid of Stainless Steel-Serrated locking plates GN 187.4 standard components can be interlocked and firmly set at a defined angle.
  The angular position of the fixing bores in relation to the serrations is not defined in the standard design. The exact positioning is available as special design.
  The range of designs makes these plates adapt-able for almost any application in this particular field. To complement these serrated locking plates, accessories such as guide pots GN 187.1 and thrust springs GN 187.2 are useful additional standard parts.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.38 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Dodge Bit Insert Flange Type (Brass Cadmium-Free)【1-5,000 Pieces Per Package】

  TOKAI METAL INDUSTRY

  General purpose type. Low cost and well balanced.

  • Volume Discount

  • Stock

  Select to compare

  Configure now
  Starting from∗ ：	0.29 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Thread Inserts

  MISUMI

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.03 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Recoil-Free (mm) SUS304【1-3 Pieces Per Package】

  RECOIL

  Made from regular 304 grade stainless steel (18–8), but inserts made from other application-specific materials are also manufactured.

  • Volume Discount

  • Stock

  Select to compare

  Configure now
  Starting from∗ ：	0.74 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Threaded inserts self-tapping with cutting slot (K0978)

  KIPP

  [Specifications]
  ・Version 1: Self-tapping
  ・Version 2: With cutting slot
  ・Material: Stainless steel, Steel
  ・Surface finish body: Bright, galvanised
  ・D1=Internal thread: M3-M16
  
  [Features]
  ・For making high-strength screw connections in materials with low shear strength
  ・Guarantees secure and firm anchoring in the host material
  ・Ideal for difficult-to-machine materials
  ・Version: steel or stainless steel

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.36 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Thread Inserts / Tangless

  MISUMI

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.90 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Threaded Inserts (K0398)

  KIPP

  [Specifications]
  ・Version 1: Standard
  ・Material: Steel, Stainless steel
  ・Core drill φ(mm): 6.9-14.8
  ・D1=Internal thread: M5-M12x1.25
  
  [Features]
  ・Enables tapped holes which have been damaged to be used again or repaired
  ・Suitable for use in various materials
  ・Quick and easy installation
  ・No other special tools are needed besides the assembly tool

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.69 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Heat Lock (Type HL)【1-1,000 Pieces Per Package】

  JAPAN DRIVE-IT

  · Type: Press fit use
  · Application: Resin, general
  · Material: Brass
  · Thread ridge type: Metric coarse screw, without notch
  · Shape: Standard
  · Diameter (following insertion): M3, M3.5, M4, M5, M6
  · Length following insertion (D = screw diameter M): 1.5D, 2D
  · Length (mm): 4.0, 5.8, 7.2, 8.2, 9.5, 12.7

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.56 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Ensat, Type 308, 3-Hole / Long Size

  KKV

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.12 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Techlock (SL)【1-5,000 Pieces Per Package】

  JAPAN DRIVE-IT

  [Type] Press Fit
  [Materials] Brass
  [Screw type] Metric (coarse) screw, without notch
  [Shape] Standard Screw Diameter (after insertion) M (mm): 2 2.5 2.6 3 3.5 4 5 6 8 10 Length (after insertion)
  [L](D = Screw Diameter M) 1 D 1.5 D 2 D 2.5 D
  [Length]B (mm) 3.0 3.9 4.0 4.9 5.0 5.8

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.23 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Stainless Steel / Insert Nut Threaded Type / IRU

  HIROSUGI-KEIKI

  [Nominal of Thread (M)] 2/2.5/2.6/3/4/5/6/8
  [Material] Free-Cutting Stainless Steel (SUS303)
  [Processing] Degreasing

  Select to compare

  Configure now
  Starting from∗ ：	0.98 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Threaded inserts reinforced (K0399)

  KIPP

  [Specifications]
  ・Version 1: Reinforced
  ・Material: Steel, Stainless steel
  ・Core drill φ(mm): 6.9-31
  ・D1=Internal thread: M4-M24x2
  
  [Features]
  ・Stronger cross section for inserts with an increased load
  ・Enables tapped holes which have been damaged to be used again or repaired
  ・Suitable for use in various materials
  ・Quick and easy installation
  ・No other special tools are needed besides the assembly tool

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.69 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Tangless Inserts Installation / Removal Tools

  MISUMI

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	164.48 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Ensat, Ultra Coarse Outside Screw, Type 309

  KKV

  Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Reinforcing female screws using Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily causes female screws to be destroyed when directly tapped.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.50 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Stainless Steel-Insert bushings

  GANTER

  Drive the Stainless Steel-Insert bushings GN 992.5 in by using a soft-head mallet. Their lamellas bridge a production tolerance of the internal diameter or of the internal square of ±0.5 mm, allowing screws to be mounted in tubes.
  The dimensions match those of the construction tubes GN 990, but checking the tolerance position of the tube is recommended.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.22 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Serrated locking plates, Sintered Steel

  GANTER

  With the aid of serrated locking plates GN 187.4 standard components can be interlocked and firmly set at a defined angle.
  The angular position of the fixing bores in relation to the serrations is not defined in the standard design. The exact positioning is available as special design.
  The range of designs makes these plates adapt-able for almost any application in this particular field. To complement these serrated locking plates, accessories such as guide pots GN 187.1 and thrust springs GN 187.2 are useful additional standard parts.
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.52 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Self-Tapping Inserts Installation Tool

  MISUMI

  Compatible thread inserts are M3, 4, 5, 6, 8, 10 and 12.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	100.97 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Tool for Inserts Machine Processing 620-Type

  KKV

  A tool for machine processing inserts. Size / internal screw d1 (mm) 2.5 3 3.5 4 5 6 size / internal screw d1 (mm) 2.5 3 3.5 4 5 6

  Select to compare

  Configure now
  Starting from∗ ：	157.55 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Tangless Insert Manual Pre-Winder Tool

  ACCURATE

  An insertion tool for tangless inserts. This can be used with either a standard type or a lock type.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	475.02 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Brass Insert Nut (Screw-In Type) IRB / IRB-C

  HIROSUGI-KEIKI

  [Nominal designation of thread (M)] 2/2.5/2.6/3/4/5/6/8
  [Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm
  [Treatment] Nickel plating (Ni)/degreasing

  Select to compare

  Configure now
  Starting from∗ ：	0.64 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Brass Bit Insert (Flanged) / HFB

  HIROSUGI-KEIKI

  [Nominal of Thread (M)] 2/2.6/3/4/5
  [Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
  [Processing] Degreasing

  Select to compare

  Configure now
  Starting from∗ ：	0.42 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Threaded inserts self-tapping with cutting slot (07652)

  NORELEM

  · For making high-strength screw connections in materials with low shear strength
  
  · Guarantees secure and firm anchoring in the host material
  
  · Ideal for difficult-to-machine materials
  
  · Version: steel or stainless steel

  Select to compare

  Configure now
  Starting from∗ ：	0.43 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Threaded inserts reinforced (07661)

  NORELEM

  · Stronger cross section for inserts with an increased load
  
  · Enables tapped holes which have been damaged to be used again or repaired
  
  · Suitable for use in various materials
  
  · Quick and easy installation
  
  · No other special tools are needed besides the assembly tool

  Select to compare

  Configure now
  Starting from∗ ：	4.43 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  HeliCoil®plus threaded inserts (07645)

  NORELEM

  · For repairing damaged threads
  
  · For making high-strength screw connections in materials with low shear strength
  
  · Resistant to corrosive action and thermal stress
  
  · High surface quality
  
  · Consisting of various threaded inserts

  Select to compare

  Configure now
  Starting from∗ ：	1.23 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Thread Insert Removal Tool

  MISUMI

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	30.36 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Thread Insert (Box)【100 Pieces Per Package】

  MISUMI

  For your own stock or for a large number of uses, buying per box is beneficial.

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	46.81 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Ensat Three-Hole / Short 307 Type

  KKV

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.00 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Tangless Insert Repair Kit

  ACCURATE

  All-in-One Tool and Ball Used For Work Including Pilot Hole Work and Insertion

  Select to compare

  Configure now
  Starting from∗ ：	139.07 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  DIN 7965 Screwed inserts

  REYHER

  RAMPA couplings; Screwed inserts; Slotted nuts

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.36 €
  Min. Shipping Days ：	2 Days

  *Unit price with basic configuration

• 

  Stainless Steel-Serrated locking plates, for welding (GN 188)

  GANTER

  With the aid of Stainless Steel-Serrated locking plates GN 188, standard components can be interlocked and firmly attached in defined angular increments. They are joined by welding.The toothing is positioned exactly on the alignment holes d4, which guarantees a parallel or right-angled arrangement.The thrust spring is placed between the toothed discs during assembly and ensures that the toothed discs separate properly when loosening. The scope of delivery includes two serrated locking plates, one thrust spring and, depending on the version, a threaded bushing.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	12.36 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Threaded inserts self-tapping with cutting bores (K0979)

  KIPP

  [Specifications]
  ・Version 1: Self-tapping
  ・Version 2: With cutting bore
  ・Material: Stainless steel, Steel
  ・D1=Internal thread: M3-M12
  
  [Features]
  ・For making high-strength screw connections in materials with low shear strength
  ・Guarantees secure and firm anchoring in the host material
  ・Ideal for difficult-to-machine materials
  ・Version: steel or stainless steel

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.51 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Threaded inserts reinforced internal thread self-locking (07664)

  NORELEM

  · Enables tapped holes which have been damaged to be used again or repaired
  
  · Suitable for use in various materials
  
  · Quick and easy installation
  
  · No other special tools are needed besides the assembly tool

  Select to compare

  Configure now
  Starting from∗ ：	10.79 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Taps for Thread Inserts

  MISUMI

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	25.31 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Tangless Insert Insertion Tool

  ACCURATE

  A tangless insert metric coarse insertion tool.

  Select to compare

  Configure now
  Starting from∗ ：	116.01 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Sprue (Unify) (UNF)【1-100 Pieces Per Package】

  NIPPON SPREW

  Screw reinforcer featuring a coiled, diamond-shaped stainless steel thread. Can achieve high-reliability tightening by effective use of the the springback.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.09 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Lock Recoil (Millimeter) SUS304

  RECOIL

  Recoil lock type insert designed to stop bolts from loosening during severe vibration or temperature changes.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.48 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Insert, Inconel X-750

  RECOIL

  The color of the main body will become silver when the method of heat treatment changes.
  
  Not plated. (Inconel Black Recoil)
  An insert (Helisert/Sprue) for use at high temperatures (425–550°C) and with non-magnetic applications.
  
  [Features]
  · Nickel alloy.
  · For use at high temperatures (425–550°C [800–1,000°F]) and with non-magnetic applications.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	20.98 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Flat Head Sonic Lock (Type SHK)

  JAPAN DRIVE-IT

  [Type] Press Fit
  [Materials] Brass
  [Screw type] Metric (coarse) screw, without notch
  [Shape] Standard, Screw Diameter (following insertion) M (mm), 2, 3, 4, 5, 6, 8, Length (following insertion)
  [L](D = screw diameter M) 1.5D 2D

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.37 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  ART 88302 ENSAT-Thread inserts

  REYHER

  ENSAT inserts; Screwed inserts

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.41 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Ensat Expanded Slot Type, Model 302, Inch Type

  KKV

  [Features]
  · Can be used for free-cutting type aluminum alloy, high-plasticity resin, etc.
  · The expanded slots act as cutting edges and are long in length, providing good engagement with the corresponding material.
  · If you set a small pilot hole diameter and insert into a hard material, the slots on the tip will contract (taper), potentially leading to defective machining.
  
  [Materials]
  SUM22L free-cutting steel (equivalent), hexavalent chromate

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.98 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

Loading...