• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products
ideanote
inCAD Library

Make sure to read this before use

What is inCAD Library?

  • Helpful application examples for mechanical engineers.

The Concept of inCAD Library

  • Online application library with a range of ideas for all manufacturing industries.
  • Save design time and learn new design applications when you are concepting new machines.

Disclaimer

  • MISUMI may not offer all parts in each application design. Available parts can only be purchased separately not as a unit shown in each application design.
  • MISUMI does not guarantee quality, accuracy, functionality, safety or reliability for the combination of the parts in each application example. Accept these points prior to use.
  • 2014 Copyright MISUMI
  • The data cannot be used for any purposes (including sales promotion) except for designing your machine.
  • All associated CAD is free. MISUMI reserves the right at its sole discretion to cancel, terminate or modify this offer.
  • MISUMI may change, add or delete application examples posted without prior notice.
  • MISUMI assumes no responsibilities for any damage incurred resulting from your use of the Service or any change, addition or deletion by MISUMI of the application examples for any reason whatsoever.

Features of inCAD Library

  1. Get great new design ideas for these application examples.

    2. Over 200 design application ideas collected from dozens of industries!

  2. Find application examples quickly! Search by function, workpiece shape, etc.


  3. Download the CAD models for each application example.

    4. Log in to download free CAD models.
    Download CAD for the entire application example!

Good IDEA! Button

Click the Good IDEA! Button when you like an application example!

*Can only be clicked once per application example.

  • Upper right corner on the page of application example details

  • Pop-up dialog for CAD data downloading

Back to top

inCAD Library Keyword Search
inCAD Library No. Search

No.000226 Escape-Blocking of Transferred Platen
Good IDEA!
37

Blocking a workpiece by utilizing V groove

Related Category

Cam Followers

Cam Followers
Product name Cam Followers/Hex Hole/Flat Type/No Seal
Part number CFFAS6-16
* Orange colored cells in the table below indicate the part numbers used in this example.
Selection criteria | Available sizes | Accuracy Info | Performance info.

Selection criteria

Centering is achieved, even if with some misalignment, when cam follower hits somewhere in the range of inclined part of V Groove.

Back to page top

Available sizes

■Cam Followers - Hex Hole, No Seal, Flat Type

Purpose Main Body Nut
Material Seal Material Surface Treatment
N/A Yes
General EN 1.3505 Equiv. ○ ○ EN 1.1191 Equiv. Black Oxide
EN 1.4125 Equiv. ○ ○ EN 1.4301 Equiv. -
Low particle generation - ○

■Sizes and Dimensions

Stud Dia. Thread Dia. x Pitch Outer Ring Dia. Outer Ring Width Overall Length
Ø3 M3 x 0.5 Ø10 7 17
Ø4 M4 x 0.7 Ø12 8 20
Ø5 M5 x 0.8 Ø13 9 23
Ø6 M6 x 1.0 Ø16 11 28
Ø8 M8 x 1.25 Ø19 11 32
Ø10 M10 x 1.25 Ø22 12 36
Ø26
Ø12 M12 x 1.5 Ø30 14 40
Ø32

Back to page top

Accuracy Info

■Cam follower accuracy

Stud Dia. Tolerance:　 h7

Outer Ring Width Tolerance:　0/-0.12

Outer Race Dia. Tolerance:

Outer Ring Dia. Tolerance
Ø10 0/-0.008
Ø12
Ø13
Ø16
Ø19 0/-0.009
Ø22
Ø26
Ø30
Ø32 0/-0.011

Back to page top

Performance info.

Load capacity and rotation speed of cam follower

Stud Dia.
- Outer Ring Dia. 		Basic Dynamic Load Rating C (kN) Basic Static Load Rating Cor (kN) Max. Allowable Load (kN) Track Load Capacity (kN) Rotational speed limit (rpm)
With Seal Without Seal
Ø3-Ø10 1.47 1.18 0.36 1.37 32900 47000
Ø4-Ø12 2.06 2.05 0.78 1.76 25900 37000
Ø5-Ø13 3.14 2.77 1.42 2.25 20300 29000
Ø6-Ø16 3.59 3.58 2.11 3.43 17500 25000
Ø8-Ø19 4.17 4.65 4.73 4.02 14000 20000
Ø10-Ø22 5.33 6.78 5.81 4.7 11900 17000
Ø10-Ø26 5.49
Ø12-Ø30 7.87 9.79 9.37 7.06 9800 14000
Ø12-Ø32 7.45

Back to page top

Oil Free Bushings I.D. F7

Oil Free Bushings I.D. F7
Product name Oil Free Bushings/Copper Alloy/Standard/I.D. F7/O.D. m6
Part number MPBZ15-15
Features The most standard type in the Copper Alloy series.
* Orange colored cells in the table below indicate the part numbers used in this example.
Selection criteria | Available sizes | Accuracy Info | Performance info.

Selection criteria

Provides high friction resistance in the environment where oil film formation is discouraged by reciprocating motions or frequent starts and stops, without lubrication.

Back to page top

Available sizes

■Oil Free Bushings I.D. F7 - Copper Alloy

Material: High Tensile Brass Alloy, Solid Lubricant Embedded

■Sizes and Dimensions

I.D.(mm) Overall Length O.D.
8 9 10 12 15 16 19 20 25 30 35 40 50 60 70 80 100
5 ○ ○ ○ ○ ○ - - - - - - - - - - - - 9
6 ○ ○ ○ ○ ○ ○ ○ ○ - - - - - - - - - 10
8 ○ ○ ○ ○ ○ ○ ○ ○ ○ - - - - - - - - 12
10 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ - - - - - - - 14
12 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ - - - - - - 18
13 - ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ - - - - - - 19
15 - ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ - - - - - 21
16 - ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ - - - - - 22
18 - ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ - - - - - 24
20 - ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ - - - 28
20A - ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ - - - - 30
25 - - - ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ - - - 33
25A - - - ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ - - - 35
30 - - - ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ - - 38
35 - - - - - - - ○ ○ ○ ○ ○ ○ ○ ○ - - 44
40 - - - - - - - ○ ○ ○ ○ ○ ○ ○ ○ ○ - 50
50 - - - - - - - - - ○ ○ ○ ○ ○ ○ ○ - 62
60 - - - - - - - - - - - - ○ ○ ○ ○ - 75
80 - - - - - - - - - - - - - ○ ○ ○ - 96
100 - - - - - - - - - - - - - - - ○ ○ 120

Back to page top

Accuracy Info

■Accuracy of Oil Free Bushings (Copper Alloy Straight Standard Type)

I.D.(mm) I.D. Tolerance (F7) O.D. O.D. Tolerance (m6)
5 +0.022
+0.010 		9 +0.015
+0.006
6 10
8 +0.028
+0.013 		12 +0.018
+0.007
10 14
12 +0.034
+0.016 		18
13 19 +0.021
+0.008
15 21
16 22
18 24
20 +0.041
+0.020 		28
20A 30
25 33 +0.025
+0.009
25A 35
30 38
35 +0.050
+0.025 		44
40 50
50 62 +0.030
+0.011
60 +0.060
+0.030 		75
80 96 +0.035
+0.013
100 +0.071
+0.036 		120

Back to page top

Performance info.

■Load Information of Oil Free Bushings (Copper Alloy Straight Standard Type)

Regular Non-lubricated
Maximum Allowable Load 29.0N/mm²
Maximum Allowable Velocity 60m/min 30m/min

Back to page top

IDEA NOTE A cylinder is used to drive the stopper/blocker.

Due to the compact size of the cylinder, it can be used in a tight space.

IDEA NOTE Blocking: V groove + cam follower

Blocking is possible - even with a slight displacement - if the cam follower makes contact within the range of the oblique portion of the V groove.

  • TERMS AND CONDITIONS FOR USE OF CAD DATA
    Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
    1. CAD Data
    The Data is prepared for assisting the Company's users in the CAD design process by providing dimensions and other Product information. In order to provide the best speed and stability working within this site, the Product drawings were simplified to reduce the size of the Data. For instance, some of the Products are shown without the oil groove shape, screws or spring shape. Also, please be aware that the tolerance, surface roughness and/or chamfer of the Data may vary from the actual Products.
    2. Disclaimer on Data
    While the Company has carefully prepared the Data, accuracy of the Data is not guaranteed and is subject to the variances as described above. The Company may also modify, add or delete the Data at any time without prior notice. The Company assumes no liability for any direct, indirect, consequential or special damages that you may claim resulted from your use of the Data or any changes to or deletions of the Data regardless of the reason. The Company provides no warranty as to the quality, accuracy, functionality, safety or reliability of the combination of Products and parts. Example applications and combinations of the Products are provided for illustrative purposes only.
    3. Copyright
    Copyrights to the content and the Data belong to the Company or the manufacturers of the Products. The said copyright is protected by the Copyright Act and international treaties. The use (including duplication, modification, uploading, posting, transmission, distribution, licensing, sales and publishing) of the Data except for the purpose to use the Data described above without prior approval of the Company is not allowed. The Data cannot be used for any purposes (including sales promotion) except for designing your machine. If you violate this provision or the laws or regulations, the Company may prohibit you from the use of the Data, the Company’s site and/or take legal action. So long as you comply with these terms and conditions, the Company grants to you a non-exclusive, non-transferable, revocable license to access and use the Data for the sole purpose of assisting you in designing machines that incorporate products.
    4. Disclaimer of Warranty
    ANY AND ALL CONTENT APPEARING ON THIS WEB SITE IS PROVIDED FOR INFORMATIONAL PURPOSES ONLY. THIS WEB SITE, ITS CONTENT AND ITS LINKS ARE PROVIDED ON AN "AS IS" AND "AS AVAILABLE" BASIS AND ARE USED ONLY AT YOUR SOLE RISK, TO THE FULLEST EXTENT PERMISSIBLE BY LAW. THE COMPANY DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, OF ANY KIND, REGARDING THIS WEB SITE (INCLUDING ITS CONTENT, HARDWARE, SOFTWARE AND LINKS), INCLUDING AS TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, TITLE, NON INFRINGEMENT, RESULTS, ACCURACY, COMPLETENESS, ACCESSIBILITY, COMPATIBILITY, SECURITY AND FREEDOM FROM COMPUTER VIRUS. THE COMPANY WILL NOT BE LIABLE FOR ANY DAMAGES OR LOSSES, INCLUDING DIRECT, INDIRECT, CONSEQUENTIAL, SPECIAL, INCIDENTAL OR PUNITIVE DAMAGES AND/OR LOST PROFITS, IN CONNECTION WITH USE OF THE INTERNET, THIS WEB SITE, ITS CONTENT OR ITS LINKS
    Further, the Company will not be liable to you for any failure or delay by the Company to provide access to the Data or any of its obligations under these terms and conditions where such failure or delay is the direct or indirect result of any circumstances beyond the Company's reasonable control (and the Company's obligations will be suspended for the duration of such circumstances).
    5. Policy of Third Parties
    You may be required to separately agree to third party's policies if you use third party software to create or browse the Data or use a third party’s CAD data. In this case, the Company does not assume any responsibility for defects of such CAD data or the software of the third party or violation of their rights. Understand them before use.

    CAD Data Download (Unit Assembly)

    CAD Data Download: File Format
    生成

    Thank you for downloading the data.

    Click the Good IDEA! button when this application example is helpful.


    This data is utilized in order to list more useful application examples in the future.

    Good IDEA!

    Cautions on the CAD data

    1. Assembly data shows the assembly drawings in the concept design phase. The sole purpose of the data is to explain the structure and functionality of the assembly and is not considered nor to be used as a final design.
      You will need to edit the Data so that it meets your specific design conditions.
    2. The CAD data unit assembly consists of sub-assemblies.
      Each sub-assembly unit can be used as it is or can be edited.

      3. * The part in the frame is a sub-assembly unit.

    3. The Data for fabricated parts is based on easy-to-edit dimensions and shapes in sketches and histories.
    4. The Data including the third-part components are made by the Company.

    Back to top

  • * Unit assembly CAD data consists of some sub-assemblies.
       Each sub-assembly unit can be used as it is or can be edited.

Application Overview

Purpose

  • To block a group of three platens that are transferred by a conveyor and separating them one by one.

Target workpiece

  • Shape: platens
  • Size: W130 x D110 x H34.5mm
  • Material: Steel
  • Weight: 5kg = 49N

Design Specifications

Operating Conditions or Design Requirements

  • Stopper cylinder stroke: 10mm
  • Blocking cylinder stroke: 10mm
  • Outer dimensions: W498 x D270 x H263mm

Required Performance

  • If we assume the number of platens to be blocked among transferred platens as 2, the load F = 49N x 2 pieces x conveyor friction coefficient μ = 49 x 2 x 0.5 = 49N.

Selection Criteria for Main Components

  • Cylinder that has a thrust greater than the load transmitted from the V groove oblique face of the platens is selected.

Design Evaluation

Verification of main components

  • The positioning cylinder is selected based on the load condition.
    • If we assume the number of platens that need to be blocked among transferred platens as 2, the load F in the transfer direction is.
      F = 49N x 2 pieces x conveyor friction coefficient μ
      = 49 x 2 x 0.5 = 49N
    • The component force F' (perpendicular to transfer direction) to push the blocking cylinder via the V groove oblique face on the platens is
      F' = Fsinθcosθ
      where, θ: "V groove angle"/2°
    • Therefore,
      F' = 49 x sin60 x cos60 = 21.2N
      If we use 3 as the safety factor, a thrust of 21.2 x 3 = 63.6N is required.
    • Hence, according to the theoretical thrust graph in the catalogue, a bore diameter of Ø16 that produces a thrust of approx. 60N is selected.

Explore Similar Application Examples

Page - / -

Part List

No. Part Name Sample picture MISUMI Part Number
For Price and Days to ship click on Part No. 		Quantity
1 Cam Followers CFFAS6-16 1
2 Oil Free Bushings MPBZ15-15 2
3 Air Cylinders MSCCN25-10 1
4 Air Cylinders With Twin Guides MGCLB16-10 1
5 Sensors for Air Cylinders MD14L1 4
6 Flow Rate Control Valves SPSNL4-M5 4
  • The part list above contains only MISUMI parts.
    The list of parts and machined products of other manufacturers than MISUMI can also be downloaded by part list download (CSV).
  • TERMS AND CONDITIONS FOR USE OF CAD DATA
    Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
    1. CAD Data
    The Data is prepared for assisting the Company's users in the CAD design process by providing dimensions and other Product information. In order to provide the best speed and stability working within this site, the Product drawings were simplified to reduce the size of the Data. For instance, some of the Products are shown without the oil groove shape, screws or spring shape. Also, please be aware that the tolerance, surface roughness and/or chamfer of the Data may vary from the actual Products.
    2. Disclaimer on Data
    While the Company has carefully prepared the Data, accuracy of the Data is not guaranteed and is subject to the variances as described above. The Company may also modify, add or delete the Data at any time without prior notice. The Company assumes no liability for any direct, indirect, consequential or special damages that you may claim resulted from your use of the Data or any changes to or deletions of the Data regardless of the reason. The Company provides no warranty as to the quality, accuracy, functionality, safety or reliability of the combination of Products and parts. Example applications and combinations of the Products are provided for illustrative purposes only.
    3. Copyright
    Copyrights to the content and the Data belong to the Company or the manufacturers of the Products. The said copyright is protected by the Copyright Act and international treaties. The use (including duplication, modification, uploading, posting, transmission, distribution, licensing, sales and publishing) of the Data except for the purpose to use the Data described above without prior approval of the Company is not allowed. The Data cannot be used for any purposes (including sales promotion) except for designing your machine. If you violate this provision or the laws or regulations, the Company may prohibit you from the use of the Data, the Company’s site and/or take legal action. So long as you comply with these terms and conditions, the Company grants to you a non-exclusive, non-transferable, revocable license to access and use the Data for the sole purpose of assisting you in designing machines that incorporate products.
    4. Disclaimer of Warranty
    ANY AND ALL CONTENT APPEARING ON THIS WEB SITE IS PROVIDED FOR INFORMATIONAL PURPOSES ONLY. THIS WEB SITE, ITS CONTENT AND ITS LINKS ARE PROVIDED ON AN "AS IS" AND "AS AVAILABLE" BASIS AND ARE USED ONLY AT YOUR SOLE RISK, TO THE FULLEST EXTENT PERMISSIBLE BY LAW. THE COMPANY DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, OF ANY KIND, REGARDING THIS WEB SITE (INCLUDING ITS CONTENT, HARDWARE, SOFTWARE AND LINKS), INCLUDING AS TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, TITLE, NON INFRINGEMENT, RESULTS, ACCURACY, COMPLETENESS, ACCESSIBILITY, COMPATIBILITY, SECURITY AND FREEDOM FROM COMPUTER VIRUS. THE COMPANY WILL NOT BE LIABLE FOR ANY DAMAGES OR LOSSES, INCLUDING DIRECT, INDIRECT, CONSEQUENTIAL, SPECIAL, INCIDENTAL OR PUNITIVE DAMAGES AND/OR LOST PROFITS, IN CONNECTION WITH USE OF THE INTERNET, THIS WEB SITE, ITS CONTENT OR ITS LINKS
    Further, the Company will not be liable to you for any failure or delay by the Company to provide access to the Data or any of its obligations under these terms and conditions where such failure or delay is the direct or indirect result of any circumstances beyond the Company's reasonable control (and the Company's obligations will be suspended for the duration of such circumstances).
    5. Policy of Third Parties
    You may be required to separately agree to third party's policies if you use third party software to create or browse the Data or use a third party’s CAD data. In this case, the Company does not assume any responsibility for defects of such CAD data or the software of the third party or violation of their rights. Understand them before use.

    CAD Data Download (Unit Assembly)

    CAD Data Download: File Format
    生成

    Thank you for downloading the data.

    Click the Good IDEA! button when this application example is helpful.


    This data is utilized in order to list more useful application examples in the future.

    Good IDEA!

    Cautions on the CAD data

    1. Assembly data shows the assembly drawings in the concept design phase. The sole purpose of the data is to explain the structure and functionality of the assembly and is not considered nor to be used as a final design.
      You will need to edit the Data so that it meets your specific design conditions.
    2. The CAD data unit assembly consists of sub-assemblies.
      Each sub-assembly unit can be used as it is or can be edited.

      3. * The part in the frame is a sub-assembly unit.

    3. The Data for fabricated parts is based on easy-to-edit dimensions and shapes in sketches and histories.
    4. The Data including the third-part components are made by the Company.

    Back to top

Back to top

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.